different types of shelves have different characteristics?meide (tianjin) storage shelf manufacturing co., ltd.-凯发平台
time：2018-05-13 views：26
different types of shelves have different characteristics and different shelf functions. the high shelf has the characteristics of good assembly, large bearing capacity, and strong stability. shelf timber uses hot and cold steel plates. the corridor-style shelves are designed for storing large quantities of similar palletized goods, also called non-channel shelves. one by one, the trays are registered in the depth direction on the support rails, increasing the storage density and improving the space application rate. this shelf is usually used in places where storage space is expensive, such as a cold store. the corridor-style shelf has four basic components: frame, rail support, tray guide, and diagonal tie rod. this kind of shelf warehouse has a high application rate and can be completed first-in-first-out or advanced-in. suitable for storing large quantities, less types of goods, batch operations. the smallest amount of space is available for maximum storage. it is suitable for large-volume and less-type cargo storage operations. the forklift truck can directly enter the cargo corridor to stop accessing the cargo and the operation is extremely convenient. shelf function, shelf effect
shelf mechanical equipment requirements: features of anti-balanced forklifts or forklift racks: applicable to storage with low inventory flow; providing 20% ??to 30% selectability; used for warehouses with low pick-up rates. ground usage rate: 60%, higher (according to the above design calculation). beam racking is the most popular and economical form of shelf, safe and convenient, suitable for various warehouses, direct access to goods. it is the simplest and most widely used shelf. can make full use of space. the convenient tray access method is used to effectively handle the loading and unloading of forklifts, which greatly improves the working efficiency. machinery and equipment requirements: anti-balanced forklift or forklift. the stacker can increase the use of floor space by 30%, operate at heights of up to 16 meters, features of beam-type shelves, smooth inventory turnover, and can provide 100% of the selection ability. increase the average pickup rate.
beam rack
shelf function, shelves shelf function provides high quality product maintenance. air utilization rate: 31%, gravity-type shelf: compared with ordinary pallet shelves, no operation channel is required, so the space application rate is increased by 60%; the pallet operation follows the first-in first-out criteria; the automatic storage rotation; the storage and the picking are two actions the separation greatly increases the output, because the cargo is slid by gravity, and there is no operation channel, so the number of transportation roads and forklifts is reduced. on each lane of the shelf, there is a certain grade of rail with rails. the unit cargo that is put into the warehouse flows from the storage end to the outbound end under the action of gravity. such a warehouse has no working channel between rows and rows, which greatly improves the application rate of the storage area. however, when it is used, it is better that the goods in the same row and on the same floor should be the same goods or goods that are put into and out of the warehouse at the same time. the height can be adjusted and equipped with various types of forklifts or stackers, which can complete the quick access of various pallets. the maximum load of the unit can reach up to 5000kg. it is the most commonly used storage method in all walks of life.
loft-style shelves are suitable for a wide range of limited venues, with a small number of situations, it can increase the application rate several times in the existing venues, can be used with the lift operation. fully modular structure, special light steel floor, low cost, fast construction. according to the practice site and demand, sensitive design into two layers, multiple layers, plenty of application space. cantilever shelves are suitable for storing long and irregular goods. the overhanging cantilever has the advantages of light weight, good load capacity, and can greatly improve the application rate and work efficiency of the warehouse when storing irregular or lengthy materials. with the addition of shelves, it is particularly suitable for small warehouses with a small space, low management, convenient management, and a wide field of vision. compared with ordinary shelf-type shelves, the application rate is even higher. shelf function, shelf effect
